Astral Traveler
Ambassador of Both Time and Space
I've settled on an Eminence Cannabis Rex. If I'm lucky I can just flip the baffle 180 degrees to clear the chassis.
| Mounting Information | |
| Recommended Enclosure Volume | |
| Sealed | Acceptable |
| Vented | Acceptable |
| Driver Volume Displaced | 0.071 cu.ft. / 2 liters |
| Overall Diameter | 12.03", 305.6 mm |
| Baffle Hole Diameter | 11.07", 281.2 mm |
| Front Sealing Gasket | Yes |
| Rear Sealing Gasket | Yes |
| Mounting Holes Diameter | 0.25", 6.4mm |
| Mounting Holes B.C.D. | 11.59", 294.4mm |
| Depth | 5.1", 129.5 mm |
| Net Weight | 8.2 lbs, 3.72 kg |
| Shipping Weight | 9.8 lbs, 4.45 kgs |
Yeah, it's 5mm too deep. The speaker is mounted off center in the baffle and it's pushed towards the top of the amp. Unless the diameter of the magnet is too large I can just flip it upside down and clear the chassis. Otherwise I'll have to make a new baffle and front load it, like @Amp Mad Scientist suggested.
You haven't been paying attention. Stop staring out of the window and read the forum ...HEHE AT, I never heard of Quilter b4 20 minutes ago.
Really?! I've had one for... A long-ish time, great amps. 200 watts packed into something that fits in your gigbag.HEHE AT, I never heard of Quilter b4 20 minutes ago.
You can't judge anything worthwhile from a YouToob video.Really?! I've had one for... A long-ish time, great amps. 200 watts packed into something that fits in your gigbag.
I didn't really like the tone from the video though, I would have EQ'd mine differently.
Most of my crap is recorded using the Quilter.
Nope, not without a known reference. Like a comparison between the speaker I already have and this one. I'm just shooting semi blind here.You can't judge anything worthwhile from a YouToob video.
Really?! I've had one for... A long-ish time, great amps. 200 watts packed into something that fits in your gigbag.
I didn't really like the tone from the video though, I would have EQ'd mine differently.
Most of my crap is recorded using the Quilter.
Nope, not without a known reference. Like a comparison between the speaker I already have and this one. I'm just shooting semi blind here.
Really?! I've had one for... A long-ish time, great amps. 200 watts packed into something that fits in your gigbag.
I didn't really like the tone from the video though, I would have EQ'd mine differently.
Most of my crap is recorded using the Quilter.
I'll usually use my Sennheiser headphones or my monitors when listening.AT, did you listen to the YT clip with headphones or through a phone or laptop speaker?
I always listen with headphones. I hear so much more when I do.
I agree. That amp is capable of so much more.Yeah, I'm good with Quilter but I didn't hear a single tone in that video I would ever want coming out of my own amp. Listened through headphones. Not a very good advertisement in my opinion and probably comes down to poor micing.
Well, it almost worked. I thought I coyld sace some money if I could get the Celestion gold in there, and I already know it sounds good. I took the Gold out of the other cab, flipped the baffle in the amp (it was tight), removed the bell from the Gold... Almost worked.
View attachment 61165

10mm would make it fit, so front loading it would work but then I would have to make a new baffle. Yeah, the grill cloth is attached to the baffle but only on the back side. It would be easy to remove and reattach.OK AT. Let me see if I can get it to fit. How much too deep is it?
In other words how far inward toward the Grille Cloth do you need to move it in order to fit?
Edit, Is the grille cloth attached to the Baffle?