Finally have a Godin
- Thread starter Hackmaster
- Start date
OP
And there they are... Three hummies.Ya but the poor router not gonna get any love with that Godin unless you go to 3 hummiesJust sayin lol
No routing. No molestation.
As it was with the 5 position switch, positions 1 & 5 were humbucking, but 2, 3, & 4 had the 60 cycle hum due to the single coil.
Not the end of the world, but somewhat annoying.
So out goes the ceramic single coil & in goes an alnico 5 twin blade bucker. Had it on hand from a previous project.
Pardon Our Interruption...
www.ebay.com
Problem solved.
The new middle pickup has the option of being splittable, so in my master plan, that will be handy.
Also had some nickel roller string trees on hand. They were a little taller than the stock black non roller ones.
That HAS to be a benefit to reducing string friction from over the nut helping the trem return back to zero.
Before...
After...
Liking the changes. But as always, a little more to come I think.
And @JohnnyGoo , three full size buckers would look good in this thing, and fit no problemo...
But why bother now.
And now I'm off to the sister in laws for a pork tenderloin, sliced open & filled with ricotta & spinach, tied up, then roasted to temp.
Mmmmmmm...
OP
Hey, I resemble that remark.That Hack --- at his Mastery
OP
It's staggering.
Different ceramic magnets, different alnico magnets, and many flavors based on well known pickup styles.
All for under $30 a piece.
Love em'
OP
OP
CabanaBoy
Ambassador of Electric Mayhem
Close!
Here's comes the Captain with the Sargent, both are a roaring and a charge'n, go go gophers, watch 'em go go go...