How Much Does String Gauge Affect Tone?

Conventional wisdom says that a heavier gauge of string will sound thicker.

Is this true?

As always, it's something that should be tested. But, I think we sometimes get an incorrect sense of the discussion. Sometimes, it's easy to come away with the impression that 8s or 7s must sound "bad", if it is suggested that something like 10s sound thicker. Then, when we hear of examples like Malmsteen or Gibbons, confusion can set in. After all, their sound isn't thin, but they're using these thin strings. What gives!

Citing examples like Malmsteen or Gibbons does serve to highlight examples where those gauges are used to good effect. But, such examples don't necessarily prove there is no difference between those strings and a heavier gauge. It just demonstrates that thin strings don't condemn you to a bad sound. Now, as in many things in electric guitar land, so much is dependent on the rig as a whole. You really can't pin the whole thing on strings.

@Col Mustard may want to chime in here, but I think I notice more of an effect of different string gauges on acoustic guitars than electric guitars.

I will say, I have noticed a very slight difference when using different gauges of strings on some of my electric guitars. But, it's not monumental. I tend to pick strings more on how they feel than by being too dependent on gauge for gauge's sake. On some of my guitars, I prefer the feel of 9s. On others I prefer the feel of 10s.

I have tried 8s. Honestly, I don't like them. I don't want to fight my guitar or feel like I'm squeezing power lines, but they are just too thin for me. I really need to feel something a bit more substantial under my fingers. That's all.
 
And red strings will sound redder - this is the thinking that gifted the world homoeopathy. A guitar comes in two parts - the bit you hang round your neck, and the bigger bit that stands on the floor. Neither operates in isolation from the other. Any gauge of string will provide any tone you want. Just set the controls properly.
 
I changed to number 8s and no one I work with ever said any thing. I play lead and some rhythm and I compared a recording from a few years ago to now with people of a very critical ear. We couldn't tell and change.
I changed my strings on my Martin to a heavier gauge and material. The newer Titanium overpriced strings. They were $42.00 a clip and that guitar tone died. Sounds like an old Fender Acoustic, the sound goes out about three feet and dies. Yep I am not off drugs like I thought and the proof is I spent $42.00 on one pack of strings. They are a 12 to 54 I think.
 
Ok to answer Roberts question I really don't think that changing gauge effect tone. Material can deal a bad hand. Steel wound VS nickel wound seems to but I have no scientific proof. Nickel is softer and has a much lower tinsel break point. Stainless steel uses nickel for strength with a little high carbon steel so it doesn't break on the first turn. Titanium is very very strong and there are different levels of hardness. I have two hips and my surgical tools are made out of Titanium.
 
I read the common view of this, but I cant hear any real difference.
To me it is just about how stiff they feel.

That is true. It took me a long time to adjust from 10s down to now 7s. I was trying to put locking tuners on all my guitar that I play. I couldn't use 7s without the locking tuners because I have a hard time seeing the E string, the treble E because it looks like air.
 
To be honest it doesn't matter what gauge strings you use on an electric guitar...you'll get a full sound anyway when the guitar is amplified and you have around 50 effects pedals hooked up in your chain of sound. It's only on an ACOUSTIC guitar that you might notice the difference between string gauges on whether or not you get a fuller tone. My advice is just play your guitar and use any string gauge set that you are comfortable with.;)


;>)/
 
Back
Top