Are String Trees Necessary???

On my new Warmoth CBS neck, I have gold played brass roller string trees, but I haven't installed them yet.

On my Fender replacement neck, that I was using previously, the b& e strings would jump out of the nut when I would do a back pick in open E, so I added roller trees.

On this neck, with Gotoh SD-91 Vintage Tuners, I'm not sure I need them.

Thoughts???

View attachment 60512

View attachment 60513
I only put them on if the string pops out of the nut as you have already mentioned.
Cheers
 
Eric Johnson Strat
Info about this topic can be found here


1614886823449.png
 
Last edited:
American Strats have had staggered tuners for years, though Fender has kept the string trees. The EJ Strat has a slightly thinner headstock designed to create enough downward pull such that it doesn't require string trees

Fender strat plus and ultra guitars do not have string trees.

You can order angled headstock strat necks from Warmoth. They eliminate the need for string trees.
Warmoth Custom Guitar Parts - Modern Tiltback Strat Neck
 
Found no need as of yet for trees on this guitar. However, it has a tendency to continually go sharp under all conditions.

No 'plink' in the nut and it will "creep up" to sharp even if you are not using the tremolo. Neck relief remains unchanged.

Most likely, need to smooth the Graph Tech Tusq XL nut slots a bit.
 
Last edited:
Found no need as of yet for trees on this guitar. However, it has a tendency to continually go sharp under all conditions.

No 'plink' in the nut and it will "creep up" to sharp even if you are not using the tremolo. Neck relief remains unchanged.

Most likely, need to smooth the Graph Tech Tusq XL nut slots a bit.

Go lightly and use lube after. Are your tuners staggered? Headstock has steeper angle than most Strats so this yields sufficient tension in nut? Usual explanation why some need Trees others do not.
 
Back
Top