The Muse I Adorn

Bocc69 said:
Worth the wait.
What's the tail piece?
Click to expand...
You mean the trem? It is a Tom Anderson Vintage Trem, although I do not think he makes them. The only "mod" I made was adding KTS titanium saddles back in my more gullable days! Tom likes them, not for the metal, but rather the cut of the groove. He now offers similar ones in a more affordable metal!
 
My Tom Anderson mood carried over until today. This is Tony the....Bulldog. Tom Anderson Bulldog to be precise. The Bulldog became the Bobcat after a cease and decist letter from Gibson, which resulted in design changes to make it less similar.


20170410_225024.jpg

20160613_210831.jpg
 
Last edited:
Yesterday, Got a little more time getting acquainted with the Ibanez AS73 (2005 or 6 I think), A2 magnets in the stock pickups.
The nut is a little high and pulls the first few frets a wee sharp.
I have bone blanks to try my first nut fab, but I will sand the bottom down a bit when time allows for now.
i like it a lot.

IMG_1511.JPG
 
jtcnj said:
Yesterday, Got a little more time getting acquainted with the Ibanez AS73 (2005 or 6 I think), A2 magnets in the stock pickups.
The nut is a little high and pulls the first few frets a wee sharp.
I have bone blanks to try my first nut fab, but I will sand the bottom down a bit when time allows for now.
i like it a lot.

View attachment 13458
Click to expand...
A quality guitar with a beautiful finish. Nice!
 
I played my EBMM Y2DSM through board # 3 into my 1965 Blackface Deluxe today.
It sounded really good and then I realized that I have never played through that gear set before.
Then I realized there must be bunches of gear combinations I have not experienced what with
9 guitars, 3 boards and 8 amplifiers that I actually gig with. Over 200 combinations there!
I have a project now. Gotta see what combinations sound good and what does not.
Gotta maybe make a spread sheet and graphs and the whole 9 yards!
 
Tony M. said:
I played my EBMM Y2DSM through board # 3 into my 1965 Blackface Deluxe today.
It sounded really good and then I realized that I have never played through that gear set before.
Then I realized there must be bunches of gear combinations I have not experienced what with
9 guitars, 3 boards and 8 amplifiers that I actually gig with. Over 200 combinations there!
I have a project now. Gotta see what combinations sound good and what does not.
Gotta maybe make a spread sheet and graphs and the whole 9 yards!
Click to expand...
Now that sounds fun! Mixing and matching gear leads to so many unexpected and often worthy results. I am finally getting a chance to do this with heads and cabs.
 
Tonight I grabbed my PRS "approximation". It is realy a Hadean SIS from Rondo. It came with a severely misleveled fret board, which lead me to pull the frets, level it and do my first re-fret. It has PRS SC245 Hollowbody pickups, Graph Tech Tusq nut and Jescar Medium-Medium frets
20180404_221754.jpg

20180404_221819.jpg

20170325_211524.jpg

20170325_211647.jpg
 
Last edited:
RVA said:
Tonight I grabbed my PRS "approximation". It is realy a Hadean SIS from Rondo. It came with a severely misleveled fret board, which lead me to pull the frets, level it and do my first re-fret. It has
PRS SC245 Hollowbody pickups, Graph Tech Tusq nut and Jescar Medium-Medium frets
View attachment 13525

View attachment 13528
View attachment 13527

View attachment 13524
Click to expand...

ALWAYS love seeing that one Ray.


I went "Funky" on my Muse last night......I call this one "Huggy Bear" because well blue tiger striped maple top..Dove wing headstock....gold hardware and abalone name inlay--- it looks like a PIMP
huggy bear.jpg
 
You must log in or register to reply here.
Back
Top