OP
mcblink
Ambassador of Riffs & Spliffs
R2 & R3...
Guess what?
- Thread starter mcblink
- Start date
Amp Mad Scientist
Ambassador of Heresy
There's a mistake.
Hold on I need to look at the schematic more.
OP
mcblink
Ambassador of Riffs & Spliffs
Amp Mad Scientist
Ambassador of Heresy
OK can you locate the 2 X 220K resistors, R 67 and R 69?
OP
mcblink
Ambassador of Riffs & Spliffs
Live action shot of LRT and I waiting around lol
What's up with these?
They're directly underneath where the dr tube board is mounted...
What's up with these?
Amp Mad Scientist
Ambassador of Heresy
Do you have 2 wires connected to R67 and R 69?
Amp Mad Scientist
Ambassador of Heresy
Sorry I'm trying to understand how that was done.
And I'm not able to look at it, except your photos.
But there should be
220K between pin 4 and 5 of the output socket...
but you are reading twice that much.
And I'm not able to look at it, except your photos.
But there should be
220K between pin 4 and 5 of the output socket...
but you are reading twice that much.
OP
mcblink
Ambassador of Riffs & Spliffs
OP
mcblink
Ambassador of Riffs & Spliffs
No, the main pcb is as it came, aside from the Dr tube mod which affects only pin 5 of each output socket and R2 and R3..
Amp Mad Scientist
Ambassador of Heresy
Do you have 2 wires connected to R67 and R 69?
Amp Mad Scientist
Ambassador of Heresy
Can you take photos of what you did?
I don't understand why the reading is twice what it should be.
OP
mcblink
Ambassador of Riffs & Spliffs
No. Nothing has been done here and they are directly underneath where th Dr tube pcb is mounted
Amp Mad Scientist
Ambassador of Heresy
Don't put the tubes in yet.
OP
mcblink
Ambassador of Riffs & Spliffs
How much detail with these pics do you need?
I may have to disassemble the whole thing again...
But for the record, I followed the Dr tube instructions to the letter. Would it help if I posted pics on the installation manual? I have those handy, but I won't be able to get live action detailed pics without total disassembly...
I may have to disassemble the whole thing again...
But for the record, I followed the Dr tube instructions to the letter. Would it help if I posted pics on the installation manual? I have those handy, but I won't be able to get live action detailed pics without total disassembly...
OP
mcblink
Ambassador of Riffs & Spliffs
Welcome home! You doing alright?
Cadorman
Ambassador of the Catocaster
Fantastic man! If it weren't for the lounge pants I wear all day you would never know that I had the top of my femur hacked off and a titanium spike hammered in to replace it.