It's done.
The difference between the stock one and this one is subtle, but the changes made were drastic.
Scale length was changed from 25.5" to 24"75" via donor neck. Which was refretted in the process.
A nut shelf was made for the locking nut.
And fret nibs were added.
Neck joint on body was also trimmed 2" from goofy looking 6 screw to a normal looking 4 screw mount.
Upper horn & bevels were also recontoured.
Bridge was moved accordingly, involving filling the old trem cavity.
And rerouting for Floyd.
Pickup routes were changed from single coil to buckers and bridge pickup was moved back.
Slathered the body & neck in glowing frogs ass green
and put it all together.
Wired with single volume & tone control and 3 way toggle switch.
Push pull pots activate coil split for both pickups, and one for "motherbucker mode that puts both humbuckers is series, turning both pickups into a quad coil humbucker. When coil split is selected in motherbucker mode, outside coils are in series.
It's a hoot.
www.richardcleaver.com
