Before I sold it, I modded the SP2's boost circuit by replacing a .1uF cap with a .015uF cap. This removed some of the low frequencies from being boosted. Which to me, it sounded much better.
View attachment 23578
Yes... .05 (.047), .022, and .010. Remember I did a Tinkers Table thread on adding a 2-pin socket so I could swap and test different cap values much easier:Thanks for the tip Sysco, much appreciated. Did you experiment with other values before the 0.015uf?
Cheers
Thanks. I have a few strips of the sockets floating around, I use them to socket the transistors in my germanium fuzz pedal builds & also to audition different component values as you did, so I'll wack a couple of them in, but still go with an 0.015uf first up. Cheers
Ok, I removed the 0.1uf cap, threw in a couple of sockets & plugged in an 0.015uf (MKT box cap), all with the board still in place. Tried it at rehearsal last night, both the boost by itself & with the overdrive on. Perfect value, no need to try any others. Thanks again Sysco, much appreciated. CheersBefore I sold it, I modded the SP2's boost circuit by replacing a .1uF cap with a .015uF cap. This removed some of the low frequencies from being boosted. Which to me, it sounded much better.
View attachment 23578
Glad that value is working for you. Sometimes I'm not quite sure what I'm hearing. It's nice to hear a verification like this. My reference amp for beautiful clean tones is my Allen Sweet Spot, which is loosely based on a Blackface Princeton Reverb. Reducing the lower frequencies from being boosted at the boost circuit kept the amp sounding tight with no perceivable loss in bass. Then I thought that the modded boost circuit of the Silver Pony 2 might not sound good with one of my JCM800s. But I was wrong, and it sounded darn good with the JCM. Which also reminds me why I love treble boosters combined with a lot of natural gain coming from the amp... :dood:Ok, I removed the 0.1uf cap, threw in a couple of sockets & plugged in an 0.015uf (MKT box cap), all with the board still in place. Tried it at rehearsal last night, both the boost by itself & with the overdrive on. Perfect value, no need to try any others. Thanks again Sysco, much appreciated. Cheers
I was just reading on TGP he is suppose to be making more Klon's?
Well if it makes you feel any better I wasn't really impressed with an OCD or a TIM. And no Guv'nor clones for meI am VERY interested in what you far more experienced guys thing about the Mosky Klon clones.
I hear the QC is a bit spotty on all of them - one of mine below the power lead wiggles out easily.
I have the Mosky Obsessive drive (OCDish clone) and Silver MM (Timmy clone).
I am under impressed with both so far, BUT some of that was while trying to find good tones with that BWG P90 I am having issues with.
I have never played either of the real OCD or Timmy either.
The Youtube vids sound good....
They always do.
I just may snag a Golden Horse - WTF <$19. is less than a 30-pack of the beer I am trying to drink less of........