Wanted: Single Strat Pickup

Sp8ctre

Sp8ctre

Ambassador of Steel
Country flag
I didn't see an area for this...

I need a Single Strat Pickup for the Middle position. RWRP please. Somehow I ended up with a set of two instead of three.

Let me know what you have. No cheapies please, I'm trying to keep the 3rd inline with the two I have which are Custom Shop Fat 50's Neck and Bridge.
 
Sp8ctre said:
I didn't see an area for this...

I need a Single Strat Pickup for the Middle position. RWRP please. Somehow I ended up with a set of two instead of three.

Let me know what you have. No cheapies please, I'm trying to keep the 3rd inline with the two I have which are Custom Shop Fat 50's Neck and Bridge.
Click to expand...
I have 2 MIM singles, you are welcome to them.
 
steveb63 said:
@Sp8ctre, How can I tell if it's rwrp?
Click to expand...

That seems to be more difficult than I thought it may be. I've read that manufacturers have no standard. Here is one way, but it won't
help unless I have the pickup in hand to compare. So I guess I'll just not worry about that!

Here is the method I found.

You can compare the polarity of two pickups just like any other magnets - hold the pole pieces together. If they repel, they're the same polarity, if they stick, they're reverse polarity.
 
Sp8ctre said:
That seems to be more difficult than I thought it may be. I've read that manufacturers have no standard. Here is one way, but it won't
help unless I have the pickup in hand to compare. So I guess I'll just not worry about that!

Here is the method I found.

You can compare the polarity of two pickups just like any other magnets - hold the pole pieces together. If they repel, they're the same polarity, if they stick, they're reverse polarity.
Click to expand...
Ok, I have some single coils at our rehearsal space, p m. Me your address,, I'll send out what I have, send back what you don't want/ need?
Sound like a plan?
 
Let's make this a little easier...maybe...instead of RWRP I guess I should be looking for something that
matches the output. So...my pickups are 6.27K Neck and 6.36K Bridge. If you guys have an ohm meter
to measure the pickups that might help?
 
iblive said:
I'm feeling really bad. All these great responses. I was going to give some smart aleck answer like.... "same way you turn a RH thread nut into a LH thread nut.... turn it over."

Sorry. Sometimes I just can't help myself.
Click to expand...
I think I'd be disappointed if you DIDN"T think that way, LOL.
Now how can I tell if my chickens are hens or roosters? That's the pressing question now.

Have a great Saturday! See you at cocktail hour.
 
steveb63 said:
I think I'd be disappointed if you DIDN"T think that way, LOL.
Now how can I tell if my chickens are hens or roosters? That's the pressing question now.

Have a great Saturday! See you at cocktail hour.
Click to expand...
Dude..... you need to add a post. Just saw your message count.

True story. One morning May 2009. Jumped into my car. Looked down at trip odometer, 66.6. Thought to myself... that can't be good. Forty-five minutes later the recession of [pick your year... 07-08-09] bit me and I was laid off. One of the lucky ones that got to enjoy an extended period of unpaid vacation.
 
iblive said:
Dude..... you need to add a post. Just saw your message count.

True story. One morning May 2009. Jumped into my car. Looked down at trip odometer, 66.6. Thought to myself... that can't be good. Forty-five minutes later the recession of [pick your year... 07-08-09] bit me and I was laid off. One of the lucky one that got to enjoy an extended period of unpaid vacation.
Click to expand...
Just noticed myself- there.
Done and done.
 
You must log in or register to reply here.
Back
Top