SOLD Turret Board for Fender Deluxe 5E3 Tweed Tube Amp, DIY Tube Amp Builders

This has been sold
Status
Not open for further replies.
T-Rex

T-Rex

Well-Known Member
Country flag
Up for sale is a new Hand Wired turret board for a replica Fender 5E3 style amp or amp build for the DIY'ers. This board started off as a pre staked 2mm AES turretboard and I have populated and wired it for use in a Fender Tweed style 5E3 amp or use it to build a DIY amp of your own. This 2mm thick board is built from the best premium quality components that are either new or Vintage Old Stock. All plate resistors are 2 watt Vishay metal film for quiet operation, and the rest of the resistors are either the same style Vishays or Vintage Old Stock 1/2watt Draloric carbon film resistors. The coupling caps are Vishay /ERO MKT, dropping resistors are wire wound and Metal Film, new fresh caps in the power supply, and the board is wired with ValveStorm Top Coat Hookup wire, the very best and comes with extra wire length for any application. This board is ready to drop in, know the quality difference on tone that it makes. $100.00
Shipping is a flat $19 to the Continental US only by USPS Mail, fully insured. Thanks for looking.

The components used on this board are:
AES 2mm thick turret board
Vishay 2watt metal film resistors
Draloric 1/2 watt Vintage Old Stock resistors
Vishay 3.75 watt dropping resistor
Vishay 2 watt dropping resistor
Vishay / ERO MKT coupling caps
ValveStorm Top Coat Hookup wire
New fresh 105C power reservoir caps
Kester .031 solder on all solder joints









 
Status
Not open for further replies.
Back
Top