SOLD: Like New Kemper Kone Speakers

Sp8ctre

Sp8ctre

Ambassador of Steel
Country flag
I bought these to use with my Kemper, but I'm downsizing my setup and sold the Kemper. I see no reason to keep the Kones without the Kemper.

I have two of them and they are like new with less than 3 hours total play time.

FEATURES AND SPECIFICATIONS:
  • Dimensions: 30.5 cm (12“)
  • Weight: 3,9 kg
  • Power : 200W rms
  • Impedance: 4 Ohm
  • Frequency Range: 50 - 10.000 Hz
  • Cut-out-diameter: 28,3 cm

$350 Shipped for the pair.
 
.....additionally....I must say....when playing through the Kemper, when I put my head in the “sweet spot” (turn to face the desk, with my head at the point of the equilateral triangle of the monitoring system) the Kemper sounds absolutely incredible!...especially with stereo modulation and time based effects! Excellent for establishment of placement in the stereo field!
 
Thatbastarddon said:
.....additionally....I must say....when playing through the Kemper, when I put my head in the “sweet spot” (turn to face the desk, with my head at the point of the equilateral triangle of the monitoring system) the Kemper sounds absolutely incredible!...especially with stereo modulation and time based effects! Excellent for establishment of placement in the stereo field!
Click to expand...
Sometimes I like to send the mains from the Kemper to my board and monitors as if they were the FOH, while sending the monitor output through the amp and Kabinet for the pant flap.:D
 
dmatthews said:
Sometimes I like to send the mains from the Kemper to my board and monitors as if they were the FOH, while sending the monitor output through the amp and Kabinet for the pant flap.:D
Click to expand...
Yeah, also on my list for tomorrow....pump it through the main PA(4x15, 2x18 sub’s, 3x12, +horns, running around 3400Watts), and maybe through a couple of powered Peavey cab’s that have a flat setting, and push(supposedly) 400Watts each through the 15’s and horns. I need to clear some snow from my roof... ;)
 
dmatthews said:
Sometimes I like to send the mains from the Kemper to my board and monitors as if they were the FOH, while sending the monitor output through the amp and Kabinet for the pant flap.:D
Click to expand...
That is close to what I do. Main XLR left to mixer, monitor out to a patch panel to be connected to the FX return of a variety of amps and cab combos. I also set up the monitors on the patch panel so I can swap from the Kemper main L/R TS and the Mixer output for tracking,
 
RVA said:
That is close to what I do. Main XLR left to mixer, monitor out to a patch panel to be connected to the FX return of a variety of amps and cab combos. I also set up the monitors on the patch panel so I can swap from the Kemper main L/R TS and the Mixer output for tracking,
Click to expand...
We live in a time of fabulous guitar toys.
Correction... fabulous guitar tools.
 
Thatbastarddon said:
Yeah, also on my list for tomorrow....pump it through the main PA(4x15, 2x18 sub’s, 3x12, +horns, running around 3400Watts), and maybe through a couple of powered Peavey cab’s that have a flat setting, and push(supposedly) 400Watts each through the 15’s and horns. I need to clear some snow from my roof... ;)
Click to expand...

It sounds incredible through a power amp cranked into 2 2x12's! I used a Crown xli1500 330watts into two cabs or 900watts bridged into one. Shook all my pictures frames until they were crooked!
 
Sp8ctre said:
It sounds incredible through a power amp cranked into 2 2x12's! I used a Crown xli1500 330watts into two cabs or 900watts bridged into one. Shook all my pictures frames until they were crooked!
Click to expand...
Oh yeah! I look forward to the first time I push the JBL towers with the Kemper....this should be fun!
 
Here's a blurb on the HX Stomp;

"With the entire library of models from the Helix family at your behest, you'll never be at a loss for tone with the HX Stomp."

Sounds like a baby Helix to me...
 
You must log in or register to reply here.
Back
Top