Wow. Nice. Thank you for this stunning contribution. Yet another nugget of OT nicety.Sorry, chili. I guess unfortunately for you there are still a few guys left here. Jokes aside, I think you have more of a cognitive issue, actually.
Wow. Nice. Thank you for this stunning contribution. Yet another nugget of OT nicety.Sorry, chili. I guess unfortunately for you there are still a few guys left here. Jokes aside, I think you have more of a cognitive issue, actually.
Wow. Nice. Thank you for this stunning contribution. Yet another nugget of OT nicety.
“Low mind” is a common colloquial term for “a mind in the gutter”. He answered you in a civil terminology.I know. I downvoted him for his initial trouble making and insulting comment towards me. ...the one that went unscaved.
To think that I never even did anything to the guy. Glad we're at least allowed to stick up for ourselves for wrong doings from other members against us here.
Pretty rude and uncalled for from Chili given the nature of this being a rather "playful" forum board. I'm sure he'll be tired this morning having had to bare a "Tucks" post in one of our threads ...then having to think about it all night.


Wow. Enough with the name calling.It's obvious one was a joke and the other (shall we say the follow-up) was not. Anyone here will see that. Chili was being a rude Karen and he got responded back to on it, that's all. Good going Chili. Get some sleep.
You cared enough to start with the name calling.Who cares if HE doesn't think is was pertinent? We do this stuff all the time. Is Chili special??
I didn’t have an opinion on any of the humor. Positive or negative. I saw it. I got it. It’s a classic trope. It’s not exactly “high brow”, and as you pointed out…one’s mind might need to be “in the gutter” to appreciate it. If there is a post that a member finds to be a “concern”, there is a “report” button. If a member complains to staff, we’ll address it.A mild Recto to Tucks joke ..."Crude"?? As you let all the GAY orientated cracks, images, and gestures sore with not even the slightest of interruption here? 99% of us are fine with the way things function here....Rams even bombed my new Dobro thread with an image drop and I responded with a laugh. Good going Karen ..I mean Chili!
Bullying? If you’re going to insult and name call other members here, someone might say something to you about it. If that’s what you mean, well…I don’t think I’m “bullying” when I comment on this behavior.I'm leaving the board now for good due to a 3rd bout of your bullying, Don. I've seen you do this to other people to and I'm sure it's part of the reason you lost and continue to lose members here in droves.
Sapient, I was not belittling or saying your mind was inferior, or low in intelligence or anything.It's obvious one was a joke and the other (shall we say the follow-up) was not. Anyone here will see that. Chili was being a rude Karen and he got responded back to on it, that's all. Good going Chili. Get some sleep.
I never needed mine much past noon. To be honest, I didn’t use the feature that often once I got my pedal board set up. I chose to use a pedal instead of the solo function most of the time, and all I ever had in the loop were delay and chorus. I rarely used the chorus, and I would kill the pedals more often than killing the loop…but there were still a couple of tunes that I would kill the whole loop.Solo and Output at the moment I have maxed out… is this normal?
This is what Im aiming to set up….I never needed mine much past noon. To be honest, I didn’t use the feature that often once I got my pedal board set up. I chose to use a pedal instead of the solo function most of the time, and all I ever had in the loop were delay and chorus. I rarely used the chorus, and I would kill the pedals more often than killing the loop…but there were still a couple of tunes that I would kill the whole loop.
I never got that into it with the 3 channels. I generally ran a little clean(channel 1…sometimes “pushed”), and pure filth, most of the time, on channel 3. I’d boost with a Red Llama for a lead push(if needed). I would occasionally run channel 2 with a slightly milder level of filth.This is what Im aiming to set up….
1 clean ch
2 orange as main rhythm boosted with mxr GT-OD
3 lead with delay in the fx loop.
I want to control all this with foot switch…..
I like ch 3 the beat but I cant get fx loop activated on Ch 3 once I hit fx button on foot switch.
Probably best to get a matched set of power tubes in there asap. You might want to look into the last preamp tube before the power section(the PI tube “V5” iirc)…maybe find a balanced 12ax7, if possible, for that spot.i also discovered 2 power tubes are bit different form the rest… some Russian made stuff…
Im going to swap them all with mesa branded ones and should sound much better.
Ramo, make sure that when you do switch tubes that you bias them, You don't want the amp running too hot or too cold tube wise.Ive got the amp back but I still think its not 100% ….. its working but it still has that “pop” sound when I switch channels…. I think needs new tubes…
Im going to change tubes and see how it goes…
Question…
Whats the normal setting for Loop Active ?
Solo and Output at the moment I have maxed out… is this normal?
I knew that thatbastarddon would be there for you regarding the last preamp tube suggestion.I never got that into it with the 3 channels. I generally ran a little clean(channel 1…sometimes “pushed”), and pure filth, most of the time, on channel 3. I’d boost with a Red Llama for a lead push(if needed). I would occasionally run channel 2 with a slightly milder level of filth.
Probably best to get a matched set of power tubes in there asap. You might want to look into the last preamp tube before the power section(the PI tube “V5” iirc)…maybe find a balanced 12ax7, if possible, for that spot.
There’s no bias adjust on the Mesas.Ramo, make sure that when you do switch tubes that you bias them, You don't want the amp running too hot or too cold tube wise.
Never mind LOLThere’s no bias adjust on the Mesas.
Much “this”!!! ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^Whenever you change tubes in amps other than MESAS that require BIASING, Laney, Marshall, VOX, PEAVEY, etc, make sure to bias when doing Tube changes.
Mesa branded will likely be JJs right now but they do color code them to find 4 that are essentially matched. If they have a blue dot then get 4 with blue dots. Same with next change etc.This is what Im aiming to set up….
1 clean ch
2 orange as main rhythm boosted with mxr GT-OD
3 lead with delay in the fx loop.
I want to control all this with foot switch…..
I like ch 3 the beat but I cant get fx loop activated on Ch 3 once I hit fx button on foot switch.
i also discovered 2 power tubes are bit different form the rest… some Russian made stuff…
Im going to swap them all with mesa branded ones and should sound much better.