Origim 50H - PTP Conversion Questions:

Last edited:
seems they are all going that route --- this is advertised as a class A TUBE AMP (but loads of circuit boards here) Fender Bassbreaker 007
1613481716916.png

TBF its not advertised as a HANDWIRED POINTTO POINT TUBE AMP --- so I guess there is nothing WRONG with the circuit boards......



 
Here are some pics I found...
I was just looking again at all these pics you posted. Looks like in the first pic, the amp has been heavily modified with orange drop caps and those two massive Nichicon filter caps. Don't know what else has been modified in there. I doubt all that made any difference unless values of caps and resistors were altered.
 
I was just looking again at all these pics you posted. Looks like in the first pic, the amp has been heavily modified with orange drop caps and those two massive Nichicon filter caps. Don't know what else has been modified in there. I doubt all that made any difference unless values of caps and resistors were altered.

I agree. I saw that. the first photo is definitely not stock....
 
I was just looking again at all these pics you posted. Looks like in the first pic, the amp has been heavily modified with orange drop caps and those two massive Nichicon filter caps. Don't know what else has been modified in there. I doubt all that made any difference unless values of caps and resistors were altered.
That's not his amp but the caps could make quite a difference in the sound....frequently Marshall has used under rated caps which we change to over rated caps.
 
even my Blackstar has a baord.........woe is me are there no real tube amps left........
1613526768677.png

oh .............wait.....................................hand wired you said ? point to point you say ? BOUTIQUIEE builders you say? Swamp origins you say? 5 watt powerhouses you say?

I give you the ONE the ONLY Owegitone Lil Sexy
sexy inside1.jpg
 
Back
Top