NGD - Another AXL Husk Build

[jtcnj]

Trying this burn in filler stick for the fret slot ends. It is a bit awkward but seems to be working ok.
You can see the 2 filled slots behind the mini torch.
The stick color is Dark Red Mahogany and while not exact, blends pretty well.

 

[jtcnj]

Mostly done; I have not glued in the nut and wont oil the fretboard until I have patched the chunks out of the fretboard edge.
The finish on this is very thin and dings easily, it is also hazed.

I think it was never finished. I probably will rub it down to get the haze off and maybe spring for cherry red dye. Then, a couple of thin coats of wipe on satin poly.

It plays very well and sounds great - finally found the P90 guitar I have been after for several years.
Sorry the pics are kind of dark.

You can see the chunks here at frets #1 and #4

 

[RVA]

Excellent job!

 

[Sp8ctre]

Fantastic! I flubbed a couple of tries at building guitars. I'll stick to knives!

 

[jtcnj]

couple more pics

You can see the shiny portions where I rubbed off some shielding paint with acetone, which cut through the surface cloudy haze.

 

[Session 5]

Excellent work jtcnj!! Shweet!

 

[JohnnyGoo]

Love that new single cut ya got there jtcnj.

 

[jtcnj]

Many thanks to @SG John !!
He sent me some magic unicorn dust to fill the chips in the edge of my fretboard.
1 didnt come out great but it is filled and smooth.
4 is better.

 

[eSGEe]

Ive put a few together they turned out well enough strated a thrid and decided I didnt hjave the time or patience to complete the task -- its in @Hackmaster Little Shop of Horror's as we speak ....I am certain it will be OVER THE TOP from anything I could have cobbled together ........ and the SOLDERING will be much much better!!!! lol