ivan H
Ambassador of Tubes & Grooves
I've always been into old British bikes, & while many of my favourites (like my "grail" bike, the Vincent Black Shadow) rarely are offered for sale & are extremely expensive anyway, other types, like the Triumph Bonneville are much more accessible for the average punter. When it comes to the old Bonnie's, a little research shows the 1968 model to be the most desirable. As well as featuring things like better braking (twin leading shoe front brake), more substantial rear swingarm, improved front damping & concentric carbs, '68 was also the year that motor parts previously only available through Triumph's "performance parts" catalogue now became standard fare. Still, finding a '68 for sale here in Oz took quite some time & I nearly gave in to get a '67 or '69. Luckily I held out until this gem became available about 4 hours away from where I live.


The (approximately 75 year old) guy that I purchased the bike off had his shed full of old British bikes. He told me he has been restoring old British bikes for most of his adult life & that he likes them to be restored to "as they came from the manufacturer".
At the time of my purchasing the bike, it had just over 6,000 miles on it since he had done the following;
Motor top end rebuilt,
Transmission & clutch rebuilt,
Rear swingarm bearings replaced,
Steering head bearings replaced,
Front forks/dampers rebuilt,
Rear dampers replaced with Koni's,
Drive sprockets & chain replaced,
Brake drums machined,
Brake shoes all replaced,
All cables replaced,
New battery fitted,
New, correct type exhausts fitted (previously had a 2 into 1 system),
New front tire fitted.
While the two Amal carbs are the correct type, they are not original to the bike. The original carbs had needed to be sleeved, so he had simply fitted a pair he had that hadn't required this be done yet.
I've probably left out a few things that have been done.
Yes, it goes as well as it looks. I'm looking forward to doing some weekend touring on it, as there are some great "riding" roads up in the mountains here.
I'll post some better pics as soon as I take some. Cheers


The (approximately 75 year old) guy that I purchased the bike off had his shed full of old British bikes. He told me he has been restoring old British bikes for most of his adult life & that he likes them to be restored to "as they came from the manufacturer".
At the time of my purchasing the bike, it had just over 6,000 miles on it since he had done the following;
Motor top end rebuilt,
Transmission & clutch rebuilt,
Rear swingarm bearings replaced,
Steering head bearings replaced,
Front forks/dampers rebuilt,
Rear dampers replaced with Koni's,
Drive sprockets & chain replaced,
Brake drums machined,
Brake shoes all replaced,
All cables replaced,
New battery fitted,
New, correct type exhausts fitted (previously had a 2 into 1 system),
New front tire fitted.
While the two Amal carbs are the correct type, they are not original to the bike. The original carbs had needed to be sleeved, so he had simply fitted a pair he had that hadn't required this be done yet.
I've probably left out a few things that have been done.
Yes, it goes as well as it looks. I'm looking forward to doing some weekend touring on it, as there are some great "riding" roads up in the mountains here.
I'll post some better pics as soon as I take some. Cheers

