Marshall DSL100hr fx loop vol drop

Ramo said:
View attachment 48214
Click to expand...

1. Take the knobs off, unscrew all the nuts.
Lift the circuit board out, and see if there is an adjustment pot on the other side of the board.
OR
2. Call the manufacturer and ask if there is a level adjust pot, to resolve the mismatch problem. Or ask them if there is any other update of fix for the audio level.
OR
3. Call K dog, and ask if there is any update to DSLhr that would resolve the effects return levels.

Kevin (Kdog) Drury Marshall USA Service 1000 Corporate Grove Dr. Buffalo Grove, IL 60089 800-877-6863 kevin.drury@USMusicCorp.com

Oh sorry, e mail K dog.
OR
4. Call the Marshall factory in Milton Keynes.
Sometimes they will fix the problem for you while you are waiting.
But you will need to drive over to Milton Keynes.
+44(0)1908 375411


contactus@marshall.com
DSL100hr effect level email.png
 
Last edited:
Amp Mad Scientist said:
1. Take the knobs off, unscrew all the nuts.
Lift the circuit board out, and see if there is an adjustment pot on the other side of the board.
OR
2. Call the manufacturer and ask if there is a level adjust pot, to resolve the mismatch problem. Or ask them if there is any other update of fix for the audio level.
OR
3. Call K dog, and ask if there is any update to DSLhr that would resolve the effects return levels.

Kevin (Kdog) Drury Marshall USA Service 1000 Corporate Grove Dr. Buffalo Grove, IL 60089 800-877-6863 kevin.drury@USMusicCorp.com

Oh sorry, e mail K dog.
OR
4. Call the Marshall factory in Milton Keynes.
Sometimes they will fix the problem for you while you are waiting.
But you will need to drive over to Milton Keynes.
+44(0)1908 375411


contactus@marshall.com
View attachment 48217
Click to expand...
oh wow :)

if i unscrew all the part i wont be able to put it back together ill have leftover part happened 100x before :). what i showed you in video happened only once. ve been using amp but has not happened since then.

did you write to them email?

when i ave some cash ill take to amp tech here and have it look at it. marshall factory is bit faraway from me its about 2h drive each direction if traffic has mercy on you :)


thanks for trying to help much appreciated, sorry for any truble and newb questions.
 
Ramo said:
oh wow :)

if i unscrew all the part i wont be able to put it back together ill have leftover part happened 100x before :). what i showed you in video happened only once. ve been using amp but has not happened since then.

did you write to them email?

when i ave some cash ill take to amp tech here and have it look at it. marshall factory is bit faraway from me its about 2h drive each direction if traffic has mercy on you :)


thanks for trying to help much appreciated, sorry for any truble and newb questions.
Click to expand...

The factory may customize your amp for free, and it might be worth while. They give you VIP treatment also.

Yes I sent them an e mail.
Wait for some answers.
The factory may have an update. ----it might be a software update.

But many Marshall amps all have the same problem. Effects pedals won't match to the amp audio levels.
This is not a new problem.
 
Amp Mad Scientist said:
The factory may customize your amp for free, and it might be worth while. They give you VIP treatment also.

Yes I sent them an e mail.
Wait for some answers.
The factory may have an update. ----it might be a software update.

But many Marshall amps all have the same problem. Effects pedals won't match to the amp audio levels.
This is not a new problem.
Click to expand...
thank you so much brother for all your efforts, its greatly appreciated. if they do it for free ill go as i always wanted to visit factory and now i have reason :)
 
Ramo said:
thank you so much brother for all your efforts, its greatly appreciated. if they do it for free ill go as i always wanted to visit factory and now i have reason :)
Click to expand...
Marshall answered and old me that they had no update for the effects loop.

I mailed K Dog and maybe he knows something...

Unable to register on the TC electronics website (Music Tribe). Cannot e mail them at this time. I have sent them a tweet.

Suggest you proceed with looking inside the spark mini.
 
Last edited:
Ramo said:
thank you so much brother for all your efforts, its greatly appreciated. if they do it for free ill go as i always wanted to visit factory and now i have reason :)
Click to expand...
Ramo, can you PM the date code and serial number?

K Dog Wrote:
I don’t think we have had any updates to the loop. Can you send me the date code next to the serial number? (XX-XX)

Thanks
KEVIN DRURY

MARSHALL SALES AND SERVICE SUPPORT

1649 BARCLAY BLVD. BUFFALO GROVE IL 60089
 
OK well...
there may be some other information but without the date code, Marshall won't pursue.

I personally:
many times Marshall effects loops did not match the effects pedals. This is a well known issue.
I usually modify the effects loop to correct the level problems.
But,
there is nothing really "wrong" with the amp, it's just made for a different type of effects unit.
 
You must log in or register to reply here.
Back
Top