Jaguar Speaker repair

[Ghostman]

The cab I just purchased was loaded with (4) Jaguars that needed some attention. While they worked, (3) of them had their terminal strips attached with hot glue. Checking on the wiring it was a slight touch and one of them popped off, making is absolutely necessary to fix as soon as possible.

I cleaned up the hot glue from the basket and terminal strip, then had to drill out the rivet left over. I rigged up the card and tape to capture the debris as I drilled out the old rivet.

A quick trip to Lowe's and I picked up some M3 screws, washers, and nylock nuts.

Now they are back in place and ready to rock again.

 

[Mitch Pearrow SJMP]

The cab I just purchased was loaded with (4) Jaguars that needed some attention. While they worked, (3) of them had their terminal strips attached with hot glue. Checking on the wiring it was a slight touch and one of them popped off, making is absolutely necessary to fix as soon as possible.

I cleaned up the hot glue from the basket and terminal strip, then had to drill out the rivet left over. I rigged up the card and tape to capture the debris as I drilled out the old rivet.

A quick trip to Lowe's and I picked up some M3 screws, washers, and nylock nuts.

Now they are back in place and ready to rock again.

Nice looking job on the repair bro, the nylock nut should never come loose with vibration.
Cheers
Mitch

 

[RVA]

Nice work and cool cab!

 

[CoyotesGator]

Excellent!

 

[eSGEe]

wow nice work!

 

[Ghostman]

Recorded some clips of the speakers through my Randall 667. Just some chug noodling

 

[Mitch Pearrow SJMP]

Recorded some clips of the speakers through my Randall 667. Just some chug noodling

Sounds good to me bro.

 

[jtcnj]