How would I find the correct corner protectors to properly fit these cabinets???? Also, what casters are the best to use on these to replace the rubber feet???
Last edited:
Jackson-Charvel 4 X 12" Cabinets:
- Thread starter Inspector #20
- Start date
OP
A front view of a cabinet with the hard to find Jackson script:
OP
Talking with a guy about making me this script in 9" x 3" to put on the front of my cabinets...
flatrockmobile
Well-Known Member
18 In. x 12 In. 1000 lbs. Capacity Hardwood Dolly
It's cheaper than buying 4 individual casters. Remove the casters and install them on the cab.
It's cheaper than buying 4 individual casters. Remove the casters and install them on the cab.
OP
You know, that's a really good idea...thanks!!!
Parts Express has all sorts of parts for speaker enclosures. Perhaps you can find something helpful there.
Parts Express: Speakers, Amplifiers, Audio Parts and Solutions
I bought some nice casters from Ace Hardware for that big Peavey Cab in my Avitar. I see those Jackson cabs have what appears to be metal inserts in the top of the cab for stacking another one on top .Dont know if that would work with casters on the bottoms.
So, Robert...
What kind of speakers are actually in that cabinet? I’d be surprised if Jackson had actually designed and built their own speakers. My personal inclination is to think they are a rebranded speaker, of some sort.
But, if they do the job, that’s what matters.
What kind of speakers are actually in that cabinet? I’d be surprised if Jackson had actually designed and built their own speakers. My personal inclination is to think they are a rebranded speaker, of some sort.
But, if they do the job, that’s what matters.
My bet would be an Eminence Legend derivative.
OP
Thanks for the tip!!!!
OP
OP
All of my cans are 'slant cabs.' Jackson's slant the full length of the cabinet, so the lugs in the top are for the heads. I run them side-by-side instead....
A gold star to you, sir.
If this post on Harmony Central is accurate, they are a Legend derivative.
Any info on a Jackson 4x12? | Harmony Central
67-8937
The 67 indicates Eminence Speakers as the manufacturer.(at least of the raw framework...they could have been coned by anyone)
The 67 indicates Eminence Speakers as the manufacturer.(at least of the raw framework...they could have been coned by anyone)
OP
The cabinet was so dirty it was almost unimaginable. However, it cleaned up nicely and sounds really good!!!
OP
Here's my concept for the cabinet nameplate....
OP
Thanks, Smitty...for $100 how, on earth could I resist!!!!
OP
Stacks are a pain.........but I've realized that......................
nothing sounds as good.
nothing sounds as good.
Last edited: