Guitar wall hanger V2

[Geeze]

Finally got to hang guitars as I own the wooden wall behind them. These are version 2 - V1 had square corners. Food grade tubing over 1/2" poplar dowels drilled into padauk at 25°. Only the Tele refuses to play nice so it's doomed to be a floor model.

Group photo.

The unpainted patch was the defunct door bell dinger. I don't understand painting a wall and not pulling / fixing the non used bits. I also pulled a Bell Telephone box out of a truly ugly wall fix in the hall.

Russ

 

[66 Galaxie]

You do amazing work amigo.

 

[fitz]

Only the Tele refuses to play nice so it's doomed to be a floor model.

Put that block with the angled dowels on a center pivot with a through bolt and some washers between the wall mounted piece.
Let it rotate to where the Tele head wants the support points.

 

[Geeze]

@fitz you got me thinking... I forgot I reduced the gap from V1 and the Tele rests at just a bit of an angle. I really didn't want to build a Tele only hanger.

Russ

 

[Geeze]

You do amazing work amigo.

This is the guitar version of marking your territory!

Russ