Furniture Style Cabs Build

fitz said:
Location pics.
How many of you still-married guys have 4 tube amps in your living room?

Haze15 & JTM45.
View attachment 102293

Origin50 & 4210
(the 50/50/50 home entertainment system)
View attachment 102294
Click to expand...
I could, but the cats will destroy them. Instead, they are locked in the cellar which is a cat-free zone. I'll put the Champ in the living room whenever I finish it, so I can play on the couch once in a while. When I had amps in the dining room, I could only have combos sitting on high pedestals that would save them from being used as scratching posts. At times I really wish that I lived in a pet-free house.

The cabs look great!
 
Last edited:
SG John said:
I could, but the cats will destroy them. Instead, they are locked in the cellar which is a cat-free zone. I'll put the Champ in the living room whenever I finish it, so I can play on the couch once in a while. When I had amps in the dining room, I could only have combos sitting on high pedestals that would save them from being used as scratching posts. At times I really wish that I lived in a pet-free house.

The cabs look great!
Click to expand...
Thanks!
My cats are terrified of my amps.
When I switch one on, the transformer hum alone sends both of them scurrying along in that low to the ground hurried run to the basement.
 
Just tracked down a worrisome vibration.
Was getting a buzzing noise at some lower frequencies - about 7th to 10th fret on the low E string.
Something I missed?
Loose pocket screw that's now buried behind something that's glued in?
Bad speaker perhaps?

Took apart the stack and isolated the vibration to the bottom cab.
Removed the back panel to eliminate that possibility and still the buzzing.
Went around with one hand feeling for vibrations while the other was plucking the guitar.

Loose logo plate...
SMH.
Two little screws - buzzing gone.
Put it all back together.
 
c449780ef3ed5d811545151a282487c0.jpg


Most elegant stack ever! All the high AF roadies of the world are just itching to toss those around on the Fitz world tour!
 
fitz said:
Did a 2nd coat rubbed on for a total of 5 coats.
Didn't look like more would make a difference, so I started the drying / waiting process.
After they had a day or so I brought them upstairs and put the feet and handles on.

View attachment 102490

View attachment 102491

Dry enough yesterday to get everything together for a test run.
Tried just about every pedal board I have on them to see what worked best.

View attachment 102492

Settled on just the Digitech pedals for chorus & reverb in the loop and the Bad Monkey out front.
(also using the BM as a splitter to run stereo with the Haze)
Set it up this morning and I'm calling it done.

View attachment 102493

View attachment 102494
Click to expand...
:guitarking:

But the Ceria tone name badge doesn't do it justice.
It should have the Fitz Tone name badge instead.
It certainly does not look like any Ceria tone I have ever seen...
 
You must log in or register to reply here.
Back
Top