OP
A few shots from yesterday's 2-10pm rehearsal at Todd's music space featuring a vintage, Pearl house kit...
'Fire Control' The SoCal Rock & Roll Band:
- Thread starter Inspector #20
- Start date
OP
We got a new Bassist.... 
And a damm good to bootWe got a new Bassist....
OP
That's it exactly, ChasFred!!!
OP
At least wasn't taken by another band!!!
We were joking with band names, so to be funny, I threw out the name "Full Metal Jackoffs" and found a group using it....
OP
Dialed in everyone's rigs Saturday night.
Mike's Seymour Duncan Convertible is adjustable from 10 to 100 watts. It's running on the 40 watt setting, gain is at 3.5, Bass 1pm, Mids full and treble at 2pm.
We used a vintage Digitech Metal Master pedal to augment and tighten the low end. The gain setting is very low and the effect is subtle with no increase in white noise when switched on. The rest of the controls are basically an EQ which is further tweaked for presence.
I tend to drive the mids all the way up and then take the edge off the tone with the contour control.
The result is a very 70's heavy metal tone that sounds very creamy and thick.
This one was easy!!!!
I suggested that Mike try a chorus with a 2band EQ for a little more flexibility.
Todd's AVT50H needs a little more attention.
We are getting (2) WGS British lead, 16Ω 80 watters and (2) WGS veteran 30, 16Ω 60 Watters for the cabinet.
A B759 Genelex Gold Lion Preamp Tube. (Free from me)
New Accutronics Reverb Tank (Free from me)
To replace the hummy/buzzy/feddbacky RP300 multi-effect pedal.....
Custom made wood pedalboard with built-in 9VDC power supply
New Vox True-Bypass Wah
Vox Joe Satriani Overdrive
New Boss CE-5
New Boss DD-3
New Boss CS-3
New Boss NS-2
New Boss GE-7
New NADY Wireless Unit with Receiver Pouch ($128.00 Package Deal)
(4) new 25 foot Monoprice 1/4" TRS Balanced, 4 Conductor Audio Cables
Mix of 6 inch and 12 inch balanced audio patch cables for effects
New Handmade (by me) custom 2 conductor cable to join amp and cabinet.
I LOVE these Monprice cables. They are using them in two of the studios where I work. Awesome cables!!!!
Mike's Seymour Duncan Convertible is adjustable from 10 to 100 watts. It's running on the 40 watt setting, gain is at 3.5, Bass 1pm, Mids full and treble at 2pm.
We used a vintage Digitech Metal Master pedal to augment and tighten the low end. The gain setting is very low and the effect is subtle with no increase in white noise when switched on. The rest of the controls are basically an EQ which is further tweaked for presence.
I tend to drive the mids all the way up and then take the edge off the tone with the contour control.
The result is a very 70's heavy metal tone that sounds very creamy and thick.
This one was easy!!!!
I suggested that Mike try a chorus with a 2band EQ for a little more flexibility.
Todd's AVT50H needs a little more attention.
We are getting (2) WGS British lead, 16Ω 80 watters and (2) WGS veteran 30, 16Ω 60 Watters for the cabinet.
A B759 Genelex Gold Lion Preamp Tube. (Free from me)
New Accutronics Reverb Tank (Free from me)
To replace the hummy/buzzy/feddbacky RP300 multi-effect pedal.....
Custom made wood pedalboard with built-in 9VDC power supply
New Vox True-Bypass Wah
Vox Joe Satriani Overdrive
New Boss CE-5
New Boss DD-3
New Boss CS-3
New Boss NS-2
New Boss GE-7
New NADY Wireless Unit with Receiver Pouch ($128.00 Package Deal)
(4) new 25 foot Monoprice 1/4" TRS Balanced, 4 Conductor Audio Cables
Mix of 6 inch and 12 inch balanced audio patch cables for effects
New Handmade (by me) custom 2 conductor cable to join amp and cabinet.
I LOVE these Monprice cables. They are using them in two of the studios where I work. Awesome cables!!!!
So by the next time I can make rehearsal, you guys are going to be all tightened up, no more screeching pedals to try and dial in, no more changing amps up to try and find something that works!
Great deal, going to sound professional/ phenomenal, and presise, sorry don’t know how to spell, and my phone won’t correct me like normal