Boss EV-30 dual expression pedal

[Dave Sloven]

This just arrived in the mail today.

I was short a regular TRS cable so I am using an insert cable and the volume jacks on the FV-500L to control the rate on my Boss DM-2W Delay. The EV-30 will control the S-Bend (two octaves down with tremolo) function on the PS-6 and the Twist function on the RE-20

 

[RVA]

Very well thought out setup!

 

[Inspector #20]

This just arrived in the mail today.

I was short a regular TRS cable so I am using an insert cable and the volume jacks on the FV-500L to control the rate on my Boss DM-2W Delay. The EV-30 will control the S-Bend (two octaves down with tremolo) function on the PS-6 and the Twist function on the RE-20

Dave, how you making the cord labels????

 

[Thatbastarddon]

Dave, how you making the cord labels????

I know I'm not Dave, but those look like factory applied...shrink tube labels. They look like the labeling I have on a couple of the snakes I have in my studio.

 

[Dave Sloven]

Yeah those labels come on the Hosa insert cables

 

[Dave Sloven]

That 5' TRS cable I bought is way too long for most applications

 

[Dave Sloven]

I ordered three 3' Hosa TRS cables (angled to straight) from Amazon today. They should sort me out for a while, even if I pick up a second EV-30

 

[Inspector #20]

I ordered three 3' Hosa TRS cables (angled to straight) from Amazon today. They should sort me out for a while, even if I pick up a second EV-30

I always run straight cables, but the straight/angled works well with this pedal I see...

 

[Dave Sloven]

Angled for the pedal end because my board is tight

 

[ChasFred]

Angled for the pedal end because my board is tight

REALLY? I would have never guessed that.

 

[Inspector #20]

Angled for the pedal end because my board is tight

Naaaaaah!

 

[Dave Sloven]

I have reconfigured my board to be much simpler but one crazy thing I did in the process was to plug both the DM-2W and the PS-6 into the EV-30

Pressing down on that pedal with the custom mode on the DM-2W and the S-Bend mode set to 2 octaves down + tremolo on the PS-6 is total madness, especially when sending feedback via the wah and then the EVH Phase 90 into it.

Try it, you'll like it

 

[Inspector #20]

@Dave Sloven - Check out my Gold Lion Tube Thread in Room 11 titled "V1 Tube Swap in DSL40C" - You may find it of interest!!!!!

 

[Dave Sloven]

You can see/hear me using the EV-30 yesterday at the end of this video