Jackson 4X12 Cabinet Corners:

[Inspector #20]

A couple are missing on this. Front corners are three holers, the rear is a four holer, flat on the back.

Kinda hard to see them in this pic, but i will snap a new one in the AM.

Looking for replacement corners....

 

[Mitch Pearrow SJMP]

A couple are missing on this. Front corners are three holers, the rear is a four holer, flat on the back.

Kinda hard to see them in this pic, but i will snap a new one in the AM.

Looking for replacement corners....

View attachment 28343

Will Marshall ones work ?
If so replace them all with the Marshall corners

 

[Inspector #20]

Will Marshall ones work ?
If so replace them all with the Marshall corners

I'm not sure. I sent an email to Amplified Parts along with photos...

 

[Mitch Pearrow SJMP]

I'm not sure. I sent an email to Amplified Parts along with photos...

Ok cool, the ones on the crate cab are far removed from anything that I have seen

 

[cdawg22]

Hey all! New guy here.
Those look to be a similar shape to the "leatherette" corner things that Mesa uses. Do you know what type of material they are made from? Metal, plastic, etc.....
Have you checked with www.mojotone.com? I get supplies from them quite often.

 

[Mitch Pearrow SJMP]

Hey all! New guy here.
Those look to be a similar shape to the "leatherette" corner things that Mesa uses. Do you know what type of material they are made from? Metal, plastic, etc.....
Have you checked with www.mojotone.com? I get supplies from them quite often.

To TTR Forum for those about to rock!
Have fun and immerse yourself in the good natured kidding an over all great forum the have here!
Cheers Mitch

 

[cdawg22]

Thanks Mitch.

 

[eSGEe]

Looks like Mitch has been busy recruiting

Dang man --- we will have to give you a title-----oh wait--- er never mind

 

[Mitch Pearrow SJMP]

Looks like Mitch has been busy recruiting

Dang man --- we will have to give you a title-----oh wait--- er never mind

I have not been doing anything, he came on board, on his own, the guys I have recently recruited have yet to post

 

[eSGEe]

Mesa.

 

[Mitch Pearrow SJMP]

Mesa.

 

[cdawg22]

Mesa.

Is that the "I like Mesas too" wink or the "only communists use channel switchers" wink? You can probably tell that I seem jaded from my experiences on other forums (bunch of snobby corksniffers).

 

[Mitch Pearrow SJMP]

Is that the "I like Mesas too" wink or the "only communists use channel switchers" wink? You can probably tell that I seem jaded from my experiences on other forums (bunch of snobby corksniffers).

This Forum is far different than the cork sniffelers
Adrian and I where having a bit of fun with one another, chime in has you did bro it’s all well here!
Cheers Mitch

 

[Mitch Pearrow SJMP]

Is that the "I like Mesas too" wink or the "only communists use channel switchers" wink? You can probably tell that I seem jaded from my experiences on other forums (bunch of snobby corksniffers).

But on a serious note
Post an introduction thread!
Then every body will give a little bit more of how these cats like to get around.
Plus’s they will all get to know ya!
Cheers Mitch
PS this is a great bunch of forum brothers not a bunch of gear snobs!

 

[Inspector #20]

Hey all! New guy here.
Those look to be a similar shape to the "leatherette" corner things that Mesa uses. Do you know what type of material they are made from? Metal, plastic, etc.....
Have you checked with www.mojotone.com? I get supplies from them quite often.

hey! they are rubber, actually....I have't looked at Mojotone of late, except for grille-cloth!!!!