NSD: Weber Custom Order...
- Thread starter Sp8ctre
- Start date
OP
Sp8ctre
Ambassador of Steel
Looking for this type cloth on the 2x12. Not sure if I want to go bright or subdued???
syscokid
Ambassador of War & Peace
OP
Sp8ctre
Ambassador of Steel
Thanks! I may look for something with some green it it to match the speakers.
That PRS looks like what I'm going for, although I've never seen it before.
syscokid
Ambassador of War & Peace
This guy really makes some very good quality stuff at a fair price. He goes by "sorrycharly" on eBay. His brand of cabs are called rawcabs. Uses 3/4" pine (1/2" for back panels) and 3/4" birch plywood for the baffleboard. Sweet dovetails, too. I bought a 1x12 Mesa-style front loader from him, and finished the pine with real Tung-oil. I'm thinking of refinishing it with some transparent colored stain and sealing it with tung oil again.
BTW, the price has crept up a bit since I got mine, but this is the one I bought:
rawcabs DIY boogie style 1x12 unfinished empty close back extension cabinet | eBay
OP
Sp8ctre
Ambassador of Steel
That's the guy! He even called me to make sure he built exactly what I wanted!
Session 5
Ambassador of Strings & Wings
ninjaking67
Ambassador of Good Will
chilipeppermaniac
Ambassador of Decibels
Those sides, top and bottom don't look like plywood, are they solid wood? If so, what type?
I am just finished building the box (carcass) for 1 of 2 hanging shelving units I am building for my girlfriend's one bathroom to hold all her towels, soaps, laundry supplies etc.
I am using 1/2 and 3/4 inch birch ply. The cab I built today is a 39x32 unit that will have one shelf in the middle that is 37.5 inches wide and yielding 2 15 inch tall spaces. The 2nd cabinet will be 33x32 likely with a vertical partition with 1 shelf like the other on the left, and 2 adjustable shelves in the right side. Either stain or paint are to be determined once I see my materials I have on hand to make face frames out of. I have to see if I have some birch left over from the saw mill or what else like cherry or poplar.
I am just finished building the box (carcass) for 1 of 2 hanging shelving units I am building for my girlfriend's one bathroom to hold all her towels, soaps, laundry supplies etc.
I am using 1/2 and 3/4 inch birch ply. The cab I built today is a 39x32 unit that will have one shelf in the middle that is 37.5 inches wide and yielding 2 15 inch tall spaces. The 2nd cabinet will be 33x32 likely with a vertical partition with 1 shelf like the other on the left, and 2 adjustable shelves in the right side. Either stain or paint are to be determined once I see my materials I have on hand to make face frames out of. I have to see if I have some birch left over from the saw mill or what else like cherry or poplar.
OP
Sp8ctre
Ambassador of Steel
Thanks for the link, but Tolex is not something I care for. It will be covered in material for sure, just not sure what kind or how bold I'll go!
