Von Herndon Custom Wound "Anubis" Humbuckers:

[Inspector #20]

I'm done using other people's stuff...I'm winding my own...

http://www.stewmac.com/Pickups_and_..._With_Alnico_2_magnets_and_black_bobbins.html

 

[JohnnyGoo]

8.2 k ohms,A2 mag ,nickel cover humbucker please.

 

[Inspector #20]

8.2 k ohms,A2 mag ,nickel cover humbucker please.

My first set will be wound special for the SG - 7.5k neck and 7.8k bridge....double wax potted, German silver covers...

 

[JohnnyGoo]

Nice

 

[Inspector #20]

 

[eSGEe]

looks like fun........

you could save yourself the headaches and just send me the SG man........its soo simple---even a cave man could do it

 

[Alex_SG]

I could do that! I have all the parts to make a couple of humbuckers... Just need the wire!

 

[Inspector #20]

looks like fun........

you could save yourself the headaches and just send me the SG man........its soo simple---even a cave man could do it

You know what??? I'm at the point now I am pissed off at the SG.....

 

[Sp8ctre]

You know what??? I'm at the point now I am pissed off at the SG.....

Wiring harness didn't help???

...and don't you need some type of a machine to wind Pups?

 

[Alex_SG]

You can hand wire pickups, but it just takes a lot longer.... And you gotta hope you don't lose count of the amount of turns you put on!

 

[Sp8ctre]

You can hand wire pickups, but it just takes a lot longer.... And you gotta hope you don't lose count of the amount of turns you put on!

Holy Crap! I could not imagine doing that...

 

[Alex_SG]

You can make up a jig and use a power drill too... Definitely the easier option if you don't want to buy a pickup winding machine.
Stewart MacDonald sells winding machines...
You can buy this, but it's expensive

http://www.stewmac.com/Luthier_Tool...f_currency=F&gclid=CPng5ZPa4dECFUMHvAod8VgD9w


Schatten make a ready made machine,

http://www.stewmac.com/Luthier_Tool...hatten_Pro_Pickup_Winder.html?pref_currency=D

Or they also make this, for about half the price.

http://www.stewmac.com/Luthier_Tool...f_currency=F&gclid=CI3rvLHa4dECFZUDvAodqR8M0A

 

[Alex_SG]

Or another alternative: http://www.stewmac.com/How-To/Onlin...Wiring/Homemade_hand_drill_pickup_winder.html

 

[Inspector #20]

You can hand wire pickups, but it just takes a lot longer.... And you gotta hope you don't lose count of the amount of turns you put on!

Nope..no counting, just impedance...

 

[Inspector #20]

Wiring harness didn't help???

...and don't you need some type of a machine to wind Pups?

harness not here yet....

 

[eSGEe]

Who's on first?

 

[Inspector #20]

The SG is winning....