More Chili Super Tech Tips: How to: Nitrocellulose Lacquer Finish Instructions - Luthiers Mercantile

[chilipeppermaniac]

As I am learning my way around applying StewMac's Colortone Aged Gloss NitroCellulose, I googled " Will Nitrocellulose shoot better if thinned? and this came up. For those who simple math challenges. this is quite a thorough set of steps. I bet if the steps are followed to the T, one should achieve as near to PERFECT a Nitro finish as is possible.

Luthiers Mercantile International

www.lmii.com

 

[chilipeppermaniac]

Nitrocellulose finishing questions - which thinners?

Hello, I'm about to spray my Tele project using my HVLP system. I have filled the grain and I'm, about to order some dark red tinted nitrocellulose lacquer for the front/back which the shop says can be buffed to a good finish directly, (without top clear coats) would anyone recommend adding...

www.tdpri.com

 

[chilipeppermaniac]

Does Nitrocellulose lacquer go bad in the can? - MIMF

 

[chilipeppermaniac]

Lacquer Finishing Trouble Shooting Guide

 

[chilipeppermaniac]

Nitrocellulose Sanding Sealer

This is the start of my first all out lacquer paint job on a strat body. I was intent to begin with genuine nitrocellulose sanding sealer to be as materials correct as possible. My buddies who build and repair high end acoustics swear by vinyl sealer then nitro color and clear on top. I...

www.strat-talk.com