NewReligion
Well-Known Member
It has been a long time coming but I finally committed to building a second (clean) channel. Master, Bass & Treble. It is switchable by a dual foot controller or mini toggle.
I have a 2014 BE-100 I was just finishing up the reverse engineering on when our great friend Alex Catlow offered up some data which confirmed my work. So a big thank you to Alex. Also a thanks to Jason Tong for the DC Heater PCB & BOM.
The donor amp is a 1981 JMP 2203. All new clean channel pots & loop are neatly located on the rear panel.
Of course there are a multitude of options one can make available upon request, but I like to keep it simple. I’m not the guy with 23 pedals & 8 switches on his amp.
I will do some fine tuning then I’ll post a demonstration in the next couple days.
David Hopkins
I have a 2014 BE-100 I was just finishing up the reverse engineering on when our great friend Alex Catlow offered up some data which confirmed my work. So a big thank you to Alex. Also a thanks to Jason Tong for the DC Heater PCB & BOM.
The donor amp is a 1981 JMP 2203. All new clean channel pots & loop are neatly located on the rear panel.
Of course there are a multitude of options one can make available upon request, but I like to keep it simple. I’m not the guy with 23 pedals & 8 switches on his amp.
I will do some fine tuning then I’ll post a demonstration in the next couple days.
David Hopkins
