fitz
Ambassador of DIY
Leftover build stuff, mostly from the VM combo cab conversion.
Got enough of that nice Marshall black levant to wrap a small cab.
The VM grill was too small to re-use on that build, but big enough for a custom 2x12.
100" string of gold flange piping.
Old VM combo back panel that I'm thinking of splitting for a semi-open back.
Pair of those Haze/Marquee 16Ω G12T-66 speakers I swapped out of my Haze15 cabs.
Last 2 reclaimed ply box frames that when I rip lengthwise on the short face yield pre-made face frames.
Top, bottom & 2 sides from the 2 boxes split lengthwise.
Scrap of more 3/4 ply to extend the sides from about 8" to a 12" cab depth.
Limiting dimensions on the junk pile are the grill at 17-1/2" across the short side, and the 24" boxes.
Baffle will be this 24 x 17-1/2", with the finished outside dims of about 25-1/2 x 19.
Speakers are shown sitting on some framing squares on top of the grill to check fitment.
Going horizontal and planning to put this on top for the amp.
Just ordered some trim pieces & hardware to get what's missing.
With shipping, project cost will be about $50 out of pocket.
Should have some build pics next weekend.
Got enough of that nice Marshall black levant to wrap a small cab.
The VM grill was too small to re-use on that build, but big enough for a custom 2x12.
100" string of gold flange piping.
Old VM combo back panel that I'm thinking of splitting for a semi-open back.
Pair of those Haze/Marquee 16Ω G12T-66 speakers I swapped out of my Haze15 cabs.
Last 2 reclaimed ply box frames that when I rip lengthwise on the short face yield pre-made face frames.
Top, bottom & 2 sides from the 2 boxes split lengthwise.
Scrap of more 3/4 ply to extend the sides from about 8" to a 12" cab depth.
Limiting dimensions on the junk pile are the grill at 17-1/2" across the short side, and the 24" boxes.
Baffle will be this 24 x 17-1/2", with the finished outside dims of about 25-1/2 x 19.
Speakers are shown sitting on some framing squares on top of the grill to check fitment.
Going horizontal and planning to put this on top for the amp.
Just ordered some trim pieces & hardware to get what's missing.
With shipping, project cost will be about $50 out of pocket.
Should have some build pics next weekend.