It's all about what you want.
And what you can get. Sometimes they're not the same.
But with a few resources, there's no reason one can't truly have what they desire, within reason.
Case in point. I wanted a gloss finish P90 SG.
I have no cash, I can't just run out & buy a new one.
Scouring Craigslist everyday within 100 miles of home, looking for that too good to pass up deal.
Also trying to sell an amplifier at the same time.
The amp wasn't moving so I had an idea.
I made the amp work for me. Advertised the amp, with will trade for P90 SG.
So after weeding thru all the unrealistic trade offers a real SG was finally offered.
A 2014 SGJ. A very good Gibson for the money. It caught my interest.
I made the drive with the amp & tried it out. I liked the way it played and that was all I needed. And the maple neck intrigued me. A deal was struck.
Not a P90, not a gloss finish, but still an SG.
So with my newly acquired prize in hand I eagerly headed home & proceeded to gut it. Everything.
Down to a bare carcass. Then sprayed the body & headstock in clear gloss lacquer.
Things were looking good at this point. Now to fit the P90's.
Minimal routing was actually needed, and by mounting the P90's into wood instead of pickguard mounted, even less routing was required.
Just the top corners & top edge needed to go.
Once everything was fitted with new pots & wiring I decided on a black pickguard.
Then a Bigsby B7 with Vibramate mount and I strung her up.
A striking difference, with minimal cash outlay.
Compromise can work to your advantage if you have a plan.
And what you can get. Sometimes they're not the same.
But with a few resources, there's no reason one can't truly have what they desire, within reason.
Case in point. I wanted a gloss finish P90 SG.
I have no cash, I can't just run out & buy a new one.
Scouring Craigslist everyday within 100 miles of home, looking for that too good to pass up deal.
Also trying to sell an amplifier at the same time.
The amp wasn't moving so I had an idea.
I made the amp work for me. Advertised the amp, with will trade for P90 SG.
So after weeding thru all the unrealistic trade offers a real SG was finally offered.
A 2014 SGJ. A very good Gibson for the money. It caught my interest.
I made the drive with the amp & tried it out. I liked the way it played and that was all I needed. And the maple neck intrigued me. A deal was struck.
Not a P90, not a gloss finish, but still an SG.
So with my newly acquired prize in hand I eagerly headed home & proceeded to gut it. Everything.
Down to a bare carcass. Then sprayed the body & headstock in clear gloss lacquer.
Things were looking good at this point. Now to fit the P90's.
Minimal routing was actually needed, and by mounting the P90's into wood instead of pickguard mounted, even less routing was required.
Just the top corners & top edge needed to go.
Once everything was fitted with new pots & wiring I decided on a black pickguard.
Then a Bigsby B7 with Vibramate mount and I strung her up.
A striking difference, with minimal cash outlay.
Compromise can work to your advantage if you have a plan.
Last edited:
