Another Lester, my first Norlin

ivan H

Ambassador of Tubes & Grooves
Country flag
I've been looking at used lester's for a good while, looking for one that grabbed my attention, researching the different models I saw. Came across an '81 Heritage 80 Standard at a dealer that I've made a few guitar purchases with & started looking into that model. After reading what people like George Gruhn (Gruhn Guitars) & Hendik Berger (Vintage & Rare) etc had to say about this model, I was definitely interested. Normally I would have travelled (interstate) to check it out, but as I've just started a new job I didn't want to take time off. Luckilly, I can trust this dealer (knew me instantly I phoned), both my LP traditional & Stratocaster select were purchased off him & are great guitars (plus he has a return policy). So, after phone calls, pics of & videos of him playing the guitar etc, plus his assurance that, good as my LP traditional & select strat are, this is a class above & he cant see me wanting to return it, I pulled the trigger on thisC__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_gibson-les-paul-heritage-80_08.jpg C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_gibson-les-paul-heritage-80_06.jpg C__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_gibson-les-paul-heritage-80_05.jpg
There is some wear on the back & upper bout, as can be expected for a 37 year old guitar, but nothing out of hand. Original frets are still good. Apparently, this model, even though it has differences to a '59, is recognised as the point where Gibson got its mojo back. No weight relieved pancake body, nooo, this has a one piece mahogany back (George Gruhn says these have better woods than later reissues). The neck is a 3 piece mahogany, as can be seen, but many say that the 3 piece is more stable than a 1 piece. Also has the long tenon again. The only thing that isn't stock is the neck humbucker, the neck Shawbucker for some reason has been replacedC__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_gibsonhertiage80a.jpg(rough job of soldering the cover on too)
Bridge still has the stock ShawbuckerC__Data_Users_DefApps_AppData_INTERNETEXPLORER_Temp_Saved Images_gibsonhertiage80b.jpg
So I'll most likely be in the market for a Shawbucker.
Of course, I wasn't about to pay the list price, nor did the dealler expect me to. So what did I pay,,, well without saying the exact figure, I can tell you that I could'a got this & a new Marshall JVM205H head & still been under the list price of a 2018 Les Paul Standard (AU$ of course). Ok, to be totally honest I'm going of the reduced price (of a dealler whose mailling list I'm on) of a JVM205H, but still, I think I did ok. Lets hope I don't gotta send it back. Cheers
Edit; Notice the wider cutout & sharper point that is a feature of this model (better upper fret access, at least, they say). Cheers
 
Last edited:
That’s a nice looking piece IH. I bought an 81 new but have never looked at the back of the pups. Now you have made me curious as to what’s there. Reports after playing are required. :D

Shawbuckers were (I believe) first issued in 1980, so an '81 should have them. Easily identified by the stamped PAT NO. 2,737,842 on the back of the baseplate, & the inked date. The story of Tim Shaw's efforts to recreate the PAF is interesting in itself. Pity Gibson wouldn't spring for the wire & materials he requested for the job, especially seeing they asked him to do it.
Thanks for the kind words guys. Cheers
 
Congrats on that nice bit of history :-)
From a fellow Australian (and considering you are saying good things about the him) will you name the dealer?
I'm south of Sydney and have purchased over the phone from Muso's Corner (Newcastle), The Music Shop (Adelaide) and Chicago Music Exchange (USA) all with good results. I've had my ups and downs with Sydney, Wollongong and Nowra shops. BTW there is a great US agent lurking in the Florida swamp that also looks after people.
 
Back
Top