120 VAC Input Receptacle:

[Inspector #20]

Need a replacement...

Thoughts????

 

[Inspector #20]

There's not enough of the old part left to determine if the screw holes are "in play" or not....

 

[Inspector #20]

@Amp Mad Scientist

 

[Inspector #20]

@syscokid

 

[Thatbastarddon]

Screws? Yep…they were there.
This should do it…note the fuse value required by the original piece, and you will need one of those too.

https://www.digikey.com/en/products/detail/qualtek/719W-00-02/245542

or

https://www.digikey.com/en/products/detail/qualtek/719W-00-04/245544

 

[Inspector #20]

Screws? Yep…they were there.
This should do it…note the fuse value required by the original piece, and you will need one of those too.

https://www.digikey.com/en/products/detail/qualtek/719W-00-02/245542

or

https://www.digikey.com/en/products/detail/qualtek/719W-00-04/245544

Awesome, Sir!!!!!

 

[Thatbastarddon]

Awesome, Sir!!!!!

Measure your opening.…and quick connect size.

 

[syscokid]

Measure your opening.…and quick connect size.

TMI! TMI! ...

 

[smitty_p]

According to the parts list for that amplifier, it is part number 0072791000, **IEC INLET W/ FUSE B/GDEC 30.

Perhaps you can order from Fender.

 

[Inspector #20]

According to the parts list for that amplifier, it is part number 0072791000, **IEC INLET W/ FUSE B/GDEC 30.

Perhaps you can order from Fender.

Thanks!