Ohm setting question

chilipeppermaniac said:
Gotcha, Well, you would likely remember your Tubes you used, no?
And did you BLOW up any of the 70 watt V speakers, or just the other types you swapped in?
Click to expand...

I used Genelex Gold Lion KT77/EL84

I don't think i ever killed a 70/80. I donated all my old 70/80's to @Mitch Pearrow SJMP

The Creambacks and Greenbacks would actually stop transmitting sound and i saw both cone/voice coil separations, ruptured voice coil bellows and surround failures.
 
Inspector #20 said:
I used Genelex Gold Lion KT77/EL84

I don't think i ever killed a 70/80. I donated all my old 70/80's to @Mitch Pearrow SJMP

The Creambacks and Greenbacks would actually stop transmitting sound and i saw both cone/voice coil separations, ruptured voice coil bellows and surround failures.
Click to expand...
The donation was a trade for the dirt bike gear.
I still need one more to fill a cab.
But I am also not searching one out .because of the lack of steady employment right now.
 
I donated a lot of surplus gear to a couple of local music academies and several up-and-coming musicians.

I have a few more items that are going to the new High Desert academy.
 
Mitch Pearrow SJMP said:
The donation was a trade for the dirt bike gear.
I still need one more to fill a cab.
But I am also not searching one out .because of the lack of steady employment right now.
Click to expand...
Mitch, I have a plane ticket for Friday booked for you. We can start work on Saturday and keep you busy for a year or 3. Say goodbye to your family NOW. Hurry, I need you.

PS. Bring the V.
 
Bdon, I don't know why you are laughing. Mitch is the older half clone of me. He is an expert framer and my first training in carpentry was framing. We have at least 2 garages, pole buildings to build here in Maryland, and then it is on to, enclosed porches, roofing, siding, gutters, windows, demo, plumbing, electric, hvac,bath, kitchen, flooring...
 
chilipeppermaniac said:
Bdon, I don't know why you are laughing. Mitch is the older half clone of me. He is an expert framer and my first training in carpentry was framing. We have at least 2 garages, pole buildings to build here in Maryland, and then it is on to, enclosed porches, roofing, siding, gutters, windows, demo, plumbing, electric, hvac,bath, kitchen, flooring...
Click to expand...
You are asking him to leave his garage behind….
 
@Don O - Sunday afternoon, we headed up into Big Bear from Lucerne Valley and drove into a blinding snowstorm.

20230115_162809.jpg

We were the last car allowed through the checkpoint and the CHP didn’t notice we were not chained (i don't have any) and we proceeded up the hill - to the 9,000 ft/asl summit - while other vehicles - including 4x4 trucks with chains - slid into the guardrails and off into the snowbanks.

Here's the snowplow and pilot car clearing the opposite lanes in the closed area.

20230115_170726.jpg

I was running with TRAC control engaged and used very light throttle application and gentle steering input to maintain control.

Several tow trucks became immobilized by the ice, even with chains affixed.

At one point, the blowing snow drifts were so intense that we could no longer see the road.

We made it down the hill, and the snow turned to sleet at Seven Oaks, Ca., about 6pm.

Here's a recent video we found from the area we passed through Sunday:

 
You must log in or register to reply here.
Back
Top